top of page

Load data for .300 AAC Blackout + .308 | 168gr | Hornady A-MAX

Recommended Powder(s): Accurate No. 11 FS

.300 AAC Blackout + .308 | 168gr | Hornady A-MAX

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 168gr | Hornady A-MAX
Manufacturer SKU:
30502
Bullet Weight:
168gr | 10.9g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.265" | 32.1mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.406" | 10.3mm
Shank Seated Depth:
0.246" | 6.2mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B2685_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:12 - 1:10

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 168gr | Hornady A-MAX bullet and 13 powders such as Accurate No. 11 FS. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 11.9 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
43366
85%
**45
100%
Accurate 5744
<<locked>>
90%
45252
89%
**37
96%
Accurate No. 11 FS 👍
<<locked>>
90%
44759
88%
**24
99%
Hodgdon LilGun
<<locked>>
87%
44991
89%
**77
100%
IMR 4227
<<locked>>
95%
39030
77%
**52
97%
Lovex D060
<<locked>>
91%
44208
87%
**21
96%
Lovex D063
<<locked>>
88%
43845
86%
**14
96%
Lovex S040
<<locked>>
83%
43047
85%
**36
100%
Lovex S053
<<locked>>
95%
36245
71%
**36
99%
ReloadSwiss RS 36
<<locked>>
97%
37681
74%
**78
96%
Shooters World Blackout
<<locked>>
88%
43845
86%
**14
96%
Shooters World Buffalo Rifle
<<locked>>
91%
44208
87%
**21
96%
Vihtavuori N110
<<locked>>
96%
44759
88%
**01
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
36289
71%
**60
99%
[Accurate 5744]*
<<locked>>
81%
33982
67%
**73
93%
Accurate No. 11 FS
<<locked>>
81%
33272
66%
**73
97%
Hodgdon LilGun
<<locked>>
81%
37449
74%
**91
100%
IMR 4227
<<locked>>
89%
32692
64%
**57
95%
[Lovex D060]*
<<locked>>
81%
33112
65%
**57
93%
[Lovex D063]*
<<locked>>
81%
34693
68%
**90
93%
Lovex S040
<<locked>>
81%
40466
80%
**06
100%
Lovex S053
<<locked>>
89%
30429
60%
**47
98%
[ReloadSwiss RS 36]*
<<locked>>
89%
30095
59%
**57
94%
[Shooters World Blackout]*
<<locked>>
81%
34693
68%
**90
93%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
33112
65%
**57
93%
Vihtavuori N110
<<locked>>
85%
32677
64%
**57
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page